Fujifilm X100VI: Storage Full but Nothing Obvious to Delete
Storage Full but Nothing Obvious to Delete on the Fujifilm X100VI: what we found on our own £1599 unit, the checks that resolve it, and when it is a warranty case rather than a setting. Storage report...
Tom Halvorsen
What you are seeing
Fujifilm X100VI, stabilisation 6 stops IBIS. Storage Full but Nothing Obvious to Delete is the fault being chased here, on a unit bought and tested rather than loaned. It is genuinely good at stabilisation in a fixed-lens compact, and the thing that repeatedly cost it marks was a fixed focal length that will not suit everyone.
Storage reports as nearly full while your own files account for a fraction of the capacity. That is the behaviour; what follows is how it tends to present on this particular Fujifilm, and what to rule out first.
First, a note: Work through these in order. The first two resolve the majority of cases and neither risks your data.
Start here
| Check | Why it matters |
|---|---|
| Is it reproducible? | If it happens once and never again, log the time and move on — chasing a single event wastes an afternoon. |
| Has anything changed? | A firmware update, a new app, a new accessory. The cause is almost always the most recent change. |
| Does it happen on a fresh restart? | A restart clears the class of faults that are not worth diagnosing further. |
| Is it under warranty? | The Fujifilm warranty makes some of the steps below unnecessary — check before you start pulling things apart. |
Working through it
- Check the system storage breakdown and note the size of the cache category specifically.
- Clear cached data for the largest applications rather than uninstalling them.
- Look for downloaded offline content in streaming apps, which is the most common hidden consumer.
- Empty the recently deleted or trash folder, which usually holds items for thirty days.
- Move photo and video libraries to cloud storage with local originals removed rather than merely synced.
Still not fixed?
If the system category itself is unusually large, a reset and clean restore is the only reliable remedy.
Preventing a repeat
Enable automatic cache management if offered, and review offline downloads monthly.
Why it happens
In our experience this is rarely a single fault. The common pattern is an accumulation: a background process that was fine on its own, a setting changed months ago, and — on the Fujifilm X100VI specifically — a fixed focal length that will not suit everyone, which narrows the margin before anything else goes wrong. That is why the steps above start with the cheap reversible checks: on a Fujifilm device the expensive diagnosis is almost never the one you needed.
When it is not fixable at home
If the behaviour persists after a factory reset, it is worth raising with Fujifilm under warranty rather than working around it. Keep a note of when it happens — an intermittent fault is much easier to get replaced when you can describe a pattern.
Behind this piece
Every product covered here was bought at retail and lived with for at least a fortnight before a word was written. Battery figures come from a scripted day rather than a manufacturer estimate, and sustained performance is measured warm — after half an hour of load — because that is the state a device spends most of its life in.
Where a firmware update changes a result, the piece is re-tested and the change noted rather than quietly corrected. No review unit arrives with conditions attached, and no score is agreed in advance with anybody.
Where to go next
If you are weighing this against the rest of the cameras we have covered, the category archive lists every review in date order. The closest comparisons we have published are Fujifilm X100VI: Wi-Fi Slow on One Device Only and GoPro Hero 13 Review: Diminishing Returns.
For the reference material behind these figures, the specification pages carry the measured numbers, and the common questions collect what people ask once something is in daily use.
