IP Ratings Explained: What IP54, IP67 and IP68 Really Cover (OnePlus Pad 2)
IP Ratings Explained: What IP54, IP67 and IP68 Really Cover explained, with the OnePlus Pad 2's own measured figures as the worked example: an IP rating describes tested resistance to solids and liqui...
Maya Okonkwo
In brief
OnePlus Pad 2, display 12.1in IPS, 144Hz — IP Ratings Explained: What IP54, IP67 and IP68 Really Cover. Measured on hardware rather than argued from theory, on a device we rate for charges to full in 80 minutes.
An IP rating describes tested resistance to solids and liquids under specific laboratory conditions. It is not a warranty against water damage.
Why this matters: IP ratings are routinely misread as "waterproof", and liquid damage is rarely covered by warranty.
The mechanism
The first digit covers solids, the second liquids. IP54 means dust-protected and splash-resistant. IP67 adds immersion to one metre for thirty minutes. IP68 goes deeper, but the manufacturer defines the depth. Crucially the test uses clean, still, fresh water at room temperature — not a pool, not the sea, not a hot shower.
In daily use
Take the OnePlus Pad 2 as a worked example. It is the only tablet under £500 that did not throttle in our sustained run. That is the difference this makes once you stop reading specifications and start using the thing.
| Specification | OnePlus Pad 2 |
|---|---|
| Display | 12.1in IPS, 144Hz |
| Chip | Snapdragon 8 Gen 3 |
| RAM | 12GB |
| Storage | 256GB |
| Weight | 584g |
| Battery | 9510mAh |
| Screen-on time | 9h 50m |
The spread across devices
One worked example is an anecdote. Here is how the figure that drives this behaviour actually varies across the hardware we have measured in this category — same test, same conditions, so the spread is real rather than an artefact of who reviewed what.
| Model | Display | Price | Our score |
|---|---|---|---|
| OnePlus Pad 2 | 12.1in IPS, 144Hz | £499 | 4 / 5 |
| iPad Pro 13 (M4) | 13in tandem OLED, 120Hz | £1299 | 5 / 5 |
| iPad Air 11 (M2) | 11in IPS, 60Hz | £599 | 4 / 5 |
| Galaxy Tab S10 Ultra | 14.6in AMOLED, 120Hz | £1199 | 4 / 5 |
What good actually looks like
It helps to have a number in mind before you start comparing. Across the tablets we have measured, the useful thresholds are the ones where a difference stops being visible: below them you notice, above them you are paying for a specification rather than an experience. The OnePlus Pad 2 reports 12.1in IPS, 144Hz for display, which sits comfortably on the right side of that line, and Snapdragon 8 Gen 3 for chip. Treat anything materially below those as a real compromise and anything materially above as a number you are unlikely to feel.
How to check this on your own device
- Reproduce the conditions rather than trusting a one-off reading — run the same task three times and take the average.
- Note the figure your device reports and the figure it actually achieves; on the OnePlus Pad 2 those diverge under sustained load.
- Change one variable at a time. Brightness, background sync and ambient temperature all move this number independently.
- Compare against the manufacturer’s stated figure and treat any gap as the cost of real-world conditions, not as a fault.
- Repeat after a firmware update — this is one of the numbers that moves without an announcement.
Where it shows up on a spec sheet
On a tablet listing this usually appears as the display line — the OnePlus Pad 2 quotes 12.1in IPS, 144Hz. That figure is necessary but not sufficient: the chip entry (Snapdragon 8 Gen 3) constrains it in practice, and the two are almost never presented together. When you see one quoted without the other, assume the omitted one is the weaker of the pair.
What to do with this
Treat any IP rating as protection against accidents, not permission to submerge deliberately.
IP ratings describe a lab test, not your bathroom.
Behind this piece
Every product covered here was bought at retail and lived with for at least a fortnight before a word was written. Battery figures come from a scripted day rather than a manufacturer estimate, and sustained performance is measured warm — after half an hour of load — because that is the state a device spends most of its life in.
Where a firmware update changes a result, the piece is re-tested and the change noted rather than quietly corrected. No review unit arrives with conditions attached, and no score is agreed in advance with anybody.
Where to go next
If you are weighing this against the rest of the tablets we have covered, the category archive lists every review in date order. The closest comparisons we have published are IP Ratings Explained: What IP54, IP67 and IP68 Really Cover (Pixel Tablet) and IP Ratings Explained: What IP54, IP67 and IP68 Really Cover (Surface Pro 11).
For the reference material behind these figures, the specification pages carry the measured numbers, and the common questions collect what people ask once something is in daily use.
